Brother International FAX-170 Service Manual - Page 58
Disconnect, panel, harness, harness, those, harnesses, groove, frame., Slightly, bring, control,
View all Brother International FAX-170 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
1.4 Control Panel ASSY (1) Disconnect the main-panel harness and the main-mike harness* from the main PCB, and then take out those harnesses from the groove of the main frame. (2) Slightly bring the control panel ASSY back up towards you so that you can release the panel lock arm from the boss of the main frame. Pull out the panel lock arm to the left and fully open the control panel ASSY. * The main-mike harness is provided on the FAX-270MC/290MC/520DT/520MC/ MFC370MC/390MC. Panel lock arm Boss Control panel ASSY Main-panel harness and main-mike harness* routed through the groove Main-mike harness* Main-panel harness SW1 SW2 P13 P2 I=.1 P15 P6 P12 Main-mike harness* Main-panel harness L P4 P3 P8 P7 SW3 n P10 (Main PCB) (FAX-270MC/290MC/520DT/520MC/ MFC370MC/390MC)