Brother International FAX-170 Service Manual - Page 75

Recording, Cutter

Get Brother International FAX-170 PDF manuals and user guides View all Brother International FAX-170 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 75 highlights

1.14 Recording Head and Cutter Unit (1) Push down the front edge of the recording head and move it back to the rear to release the tabs from the cutter unit. NOTE: Take care not to lose the three springs placed under the recording head. NOTE: Never disassemble the cutter unit. Recording head Recording head harness N Tabs Cutter unit (Front) Springs ■ Reassembling Notes • When installing the recording head, make sure that the three springs are set on the bosses of the cutter unit. • Make sure the recording head harness goes through the cutout provided in the cutter unit. • It is recommended that you install the platen right after putting the recording head back into place. If not secured by the platen, the recording head could easily come out with any impact.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
1.14
Recording
Head
and
Cutter
Unit
(1)
Push
down
the
front
edge
of
the
recording
head
and
move
it
back
to
the
rear
to
release
the
tabs
from
the
cutter
unit.
NOTE:
Take
care
not
to
lose
the
three
springs
placed
under
the
recording
head.
NOTE:
Never
disassemble
the
cutter
unit.
Recording
head
Recording
head
harness
N
Tabs
Cutter
unit
(Front)
Springs
■
Reassembling
Notes
•
When
installing
the
recording
head,
make
sure
that
the
three
springs
are
set
on
the
bosses
of
the
cutter
unit.
•
Make
sure
the
recording
head
harness
goes
through
the
cutout
provided
in
the
cutter
unit.
•
It
is
recommended
that
you
install
the
platen
right
after
putting
the
recording
head
back
into
place.
If
not
secured
by
the
platen,
the
recording
head
could
easily
come
out
with
any
impact.