Brother International HL-2400CEN Users Manual - English - Page 165
Remove the Oil Bottle and the Fuser Cleaner from the Fusing Unit., When removing the Fusing Unit
View all Brother International HL-2400CEN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 165 highlights
USER'S GUIDE Note If you begin using a new Fusing Unit immediately, poor print quality may result. Please wait for 30 minutes after installing a new Fusing Unit to allow the oil to circulate completely through to the Heat Roller. 4. Remove the Fusing Unit from the printer by holding the handles on both sides. Fig. 5-21 Removing the Fusing Unit ! Caution When removing the Fusing Unit from the printer, be sure to keep the Fusing Unit flat, so oil will not spill. Considerable damage can occur if oil is spilled inside the printer. 5. Remove the Oil Bottle and the Fuser Cleaner from the Fusing Unit. 6. Install the new Fusing Unit into the printer. Be sure to insert the Fusing Unit completely into the printer. 5-18 Fig. 5-22 Installing the New Fusing Unit