Brother International HL-2400CEN Users Manual - English - Page 38
Installing the Oil Bottle and the Fuser Cleaner
View all Brother International HL-2400CEN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
CHAPTER 2 SETTING UP THE PRINTER Installing the Oil Bottle and the Fuser Cleaner 1. Open the Top Cover and release the pressure on the Fusing Unit rollers by pushing the Pressure Release Levers to the OPEN position ( ). Remove the orange protective parts fitted between the rollers of the Fusing Unit ( ). Make sure that the Pressure Release Levers are put back to the SET position. . Fig. 2-14 Remove the Protective Parts 2. Install the Oil Bottle into the Fusing Unit with the label side facing the front of the printer. The Oil Bottle is keyed to prevent incorrect installation. Fig. 2-15 Install the Oil Bottle ! Caution Do not spill the oil inside the printer. If the oil does spill, it might cause damage to the printer. If you do spill any oil, consult your dealer or our authorized service representative. 2-9