Brother International HL-2400CEN Users Manual - English - Page 99
Format Device, Device 1, Execute Data, Device List, Delete, Exit To Device Operation
View all Brother International HL-2400CEN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
CHAPTER 4 CONTROL PANEL If DEVICE is selected, Display Message FORMAT DEVICE Exit Card Operation Format a new flash memory card, HDD card or optional HDD. Exit to DEVICE OPERATION When the display shows "FORMAT DEVICE," press the Set button to format the installed card. After the printer finishes formatting the device, you must exit to the "DEVICE OPERATION" menu. Notes • When the card is formatted, data that was previously written is erased. • It takes ten or more seconds to format a 2-Mbyte flash memory card, HDD card or optional HDD. The larger the capacity of the device, the longer time it takes to format. When the installed flash memory card, HDD card or optional HDD is formatted: When you enter this mode menu with a formatted device installed, the display shows the following menus: Display Message DEVICE 1 DEVICE 2 DEVICE 3 Card Operation Select Card 1. Select Card 2. Select optional HDD. After you have selected the card, the display shows the following messages: Display Message EXECUTE DATA DEVICE LIST SAVE DELETE Flash Operation Select the data ID and execute the selected data. This menu appears only when data has been saved on the card. Print the contents of the flash memory, HDD card or optional HDD. This menu appears only when something has been saved in the device. Save received data, macros and fonts. Delete items from the device. 4-35