Brother International HL-2400CEN Users Manual - English - Page 74

USER'S GUIDE Mode Menu (Continued) INTERFACE MODE (Continued) Setting Menu I/F AUTO (Continued) FORMAT MODE ORIENTATION AUTO MODE PAGE FORMAT MODE RESOLUTION MODE PAGE PROTECTION COLOR MODE exit RESOLUTION HRC SETTING exit PROTECT=AUTO Sub-Setting Menu Setting MIO Setting Available only when a commercial MIO card has been installed. The settings available on the installed MIO card can appear under the sub-setting menu. ORI=PORTRAIT PORTRAIT or LANDSCAPE AUTO LF=OFF ON ... LF + CR OFF ... CR only AUTO CR=OFF ON ... LF, FF, or VT + CR OFF ... LF, FF, or VT only AUTO WRAP=OFF ON ... Auto wrap on OFF ... Auto wrap off AUTO SKIP=ON ON ... Auto FF at bottom margin (HP mode) OFF ... No FF at bottom margin AUTO MASK=OFF ON ... Auto mask on (EPSON & IBM modes) OFF ... Auto mask off exit Exit to AUTO MODE PAPER =LETTER LETTER, LEGAL, A4, A5, (For 120V model) B5, EXECUTIVE, JIS B5, PAPER =A4 COM10 and DL (For 220/240V model) LEFT M = 0C 0 to 126 columns RIGHT M = 80C 10 to 136 columns (Letter, Portrait) RIGHT M = 78C 10 to 136 columns (A4, Portrait) TOP M =0.5" (HP mode) 0, 0.33, 0.5, 1.0, 1.5, or 2.0" (0,8.4, 12.7, 25.4, 38.1 or 50.8 mm) BOTTOM M=0.5" 0, 0.33, 0.5, 1.0, 1.5, or 2.0" (HP mode) (0,8.4, 12.7, 25.4, 38.1 or 50.8 mm) LINES = 60L 5 to 128 lines/page (HP, Letter, Portrait) LINES = 64L 5 to 128 lines/page (HP, A4, Portrait) X OFFSET= 0 -500 (left) to +500 (right) dots Y OFFSET= 0 -500 (down) to +500 (up) dots exit Exit to PAGE FORMAT MODE COLOR PRINT = ON...Enable color printing ON OFF...Monochrome print mode Exit to FORMAT MODE RESOLUTION 300 or 600 dpi HRC=MEDIUM OFF, LIGHT, MEDIUM, or DARK Exit to RESOLUTION MODE AUTO, OFF, LETTER, A4, or LEGAL DEVICE OPERATION When the commercial flash memory card, HDD card or optional HDD has not been formatted: (HP mode only) FORMAT DEVICE DEVICE1 DEVICE2 Format the flash memory card, HDD card or optional HDD. DEVICE3 exit Exit Exit to DEVICE OPERATION 4-10