Brother International HL-2400CEN Users Manual - English - Page 191
slot are open, or outward. ., the DIMM slot. Check that the locks on each side of the DIMM
View all Brother International HL-2400CEN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 191 highlights
USER'S GUIDE 2. Unscrew the two screws securing the rear plate of the main controller board and pull out the main controller board. Fig. 5-53 Removing the Main Controller Board 3. Unpack the DIMM and hold it by its edge. ! Caution Do not touch the memory chips and the surface of the main controller board. If static electricity collects, it may damage these electrical parts. 4. Hold the DIMM with your fingers against the side edges and thumb against the back edge. Align the notches on the DIMM with the DIMM slot. (Check that the locks on each side of the DIMM slot are open, or outward.) . Fig. 5-54 Install the DIMM 5. Press the DIMM straight into the slot (press firmly). Make sure the locks on each side of the DIMM snap inwards into place. (To remove a DIMM, the locks must be released.) 5-44