Brother International HL-3070CW Quick Setup Guide - English - Page 24

Wireless Network Windows® Configuration in Infrastructure mode, using a network cable temporarily 10 Configure the wireless settings You must know your wireless network settings before you proceed with this installation. Make sure you take notes on all the current settings such as SSID, authentication and encryption of your wireless network environment. If you do not know them, contact your network administrator or the manufacturer of your access point/router. Item Communication mode: (Infrastructure) Network name: (SSID, ESSID) Authentication method: (Open System, Shared key, WPA-PSK 1, WPA2-PSK 1, LEAP, EAP-FAST) Encryption mode: (None, WEP,TKIP, AES, CKIP) Network key: (Encryption key, WEP key 2, Passphrase) Example Infrastructure HELLO WPA2-PSK Record the current wireless network settings AES 12345678 1 WPA/WPA2-PSK is a Wi-Fi Protected Access Pre-Shared Key, which lets the Brother wireless machine associate with access points using TKIP or AES encryption (WPA-Personal). WPA-PSK (TKIP or AES) and WPA2-PSK (AES) use a Pre-Shared Key (PSK) that is 8 or more characters in length, up to a maximum of 63 characters. 2 The WEP key is for 64-bit encrypted networks or 128-bit encrypted networks and can contain both numbers and letters. If you do not know this information you should see the documentation provided with your access point or wireless router. This key is a 64-bit or 128-bit value that must be entered in an ASCII or HEXADECIMAL format. For example: 64-bit ASCII: 64-bit Hexadecimal: 128-bit ASCII: 128-bit Hexadecimal: Uses 5 text characters e.g. "Hello" (this is case sensitive) Uses 10 digits of hexadecimal data e.g. "71f2234aba" Uses 13 text characters e.g. "Wirelesscomms" (this is case sensitive) Uses 26 digits of hexadecimal data e.g. "71f2234ab56cd709e5412aa3ba" IM PORTA NT You need to temporarily use an Ethernet cable during configuration. (cable not included) a Make sure the printer power switch is on. b Turn on your computer. (You must be logged on with Administrator rights.) c Put the supplied CD-ROM into your CD-ROM drive. The opening screen will appear automatically. Choose your printer model and the language. Note If the Brother screen does not appear automatically, go to My Computer (Computer), double-click the CD-ROM icon, and then doubleclick start.exe. 24