Brother International HL-3140CW Quick Setup Guide - English - Page 10

USB Macintosh For Macintosh USB Interface Cable Users 9 Before you install IMPORTANT For users of Mac OS X v10.6.7 or lower: upgrade to Mac OS X v10.6.8, 10.7.x, 10.8.x. (For the latest drivers and information for the Mac OS X you are using, visit http://solutions.brother.com/.) a Make sure your machine is connected to an AC power source and your Macintosh is ON. You must be logged on with Administrator rights. b Connect the USB cable to the USB port marked with the symbol on your machine, and then connect the cable to your Macintosh. c Make sure your machine is turned on. d The installation screens appear one after another. If prompted, follow any on-screen instructions. NOTE It may take a few minutes for the installation to complete. e Choose your machine from the list, and then click Next. f When the Add Printer screen appears, click Add Printer. g Choose your machine from the list, click Add, and then click Next. NOTE • For HL-3170CDW: to add the PS driver (BR-Script3 printer driver), select it from the Print Using (Use) pop-up menu. • When the Brother Support screen appears, make your selection and follow the on-screen instructions. 10 Install the printer driver Finish The installation is now complete. a Put the CD-ROM into your CD-ROM drive, and then double-click the BROTHER icon on your desktop. b Double-click the Start Here OSX icon. If prompted, select your model. c (HL-3140CW / HL-3150CDW / HL-3170CDW) Choose Local Connection (USB), and then click Next. 10