Brother International HL-3140CW Quick Setup Guide - English - Page 3

Remove the packing, material from the, machine - cartridge

Page 3 highlights

2 Remove the packing material from the machine CCAAUUTTIOINON DO NOT eat the silica gel pack, please throw it away. If ingested, seek medical attention immediately. IMPORTANT DO NOT connect the AC power cord yet. a Remove the packing tape from the outside of the machine. b Fully open the top cover by lifting up on the handle a. d Take out all four drum and toner cartridge assemblies. IMPORTANT To avoid print quality problems, DO NOT touch the shaded part shown in the illustration. e Remove the orange packing piece from the belt unit. c Slide all eight yellow drum locks in the direction of the arrows as shown in the illustration below. f Remove the orange packing piece from each drum and toner cartridge assembly. 3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34

3
2
Remove the packing
material from the
machine
CAUTION
DO NOT eat the silica gel pack, please throw it
away. If ingested, seek medical attention
immediately.
a
Remove the packing tape from the outside of
the machine.
b
Fully open the top cover by lifting up on the
handle
a
.
c
Slide all eight yellow drum locks in the direction
of the arrows as shown in the illustration below.
d
Take out all four drum and toner cartridge
assemblies.
e
Remove the orange packing piece from the belt
unit.
f
Remove the orange packing piece from each
drum and toner cartridge assembly.
IMPORTANT
DO NOT connect the AC power cord yet.
IMPORTANT
To avoid print quality problems, DO NOT touch
the shaded part shown in the illustration.