Brother International HL-3140CW Quick Setup Guide - English - Page 5
Turn on the machine
View all Brother International HL-3140CW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
d Load paper in the tray and make sure: The paper is below the maximum paper mark (bbb) a. Overfilling the paper tray will cause paper jams. The side to be printed on is face down. The paper guides touch the sides of the paper so it will feed properly. 4 Turn on the machine IMPORTANT DO NOT connect the interface cable yet. a Connect the AC power cord to the machine and then connect it to an AC power outlet. b Press and hold down on the control panel. e Put the paper tray firmly back in the machine. Make sure it is completely inserted into the machine. f Lift the support flap a to prevent paper from sliding off the face-down output tray. c Do one of the following: For HL-3140CW / HL-3150CDW / HL-3170CDW: Go to step 5. For HL-3150CDN: Go to step 6. For information about recommended paper: see User's Guide: Recommended paper and print media. 5