Brother International ImageCenter„ ADS2500W Quick Setup Guide - English - Page 21
Wireless Network, To install MFL-Pro Suite, For Windows, users, For Macintosh users
View all Brother International ImageCenter„ ADS2500W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
For Wireless Network Users i Enter the Network Key you wrote down in step 9-a on page 17, and then click Next. k Disconnect the USB cable between the computer and the machine. Note If your network is not configured for Authentication and Encryption, the following screen will appear. To continue configuration, click OK and go to j. j Click Next. The settings will be sent to your machine. l Click Next to continue to install MFL-Pro Suite. Wireless setup is now complete. A four level indicator at the top of your machine's LCD will show the wireless signal strength of your access point/router. To install MFL-Pro Suite For Windows® users: Now go to Step 12-e on page 29 For Macintosh users: Now go to Step 12-d on page 31 Note • The settings will remain unchanged if you click Cancel. • If you want to manually enter the IP address settings of your machine, click Change IP Address and enter the necessary IP address settings for your network. • If the wireless setup failure screen appears, click Retry and try starting from step h again. Wireless Network 21