Brother International Innov-is 1250D Operation Manual - Page 110
Align the mark at the upper edge of the 1/4
View all Brother International Innov-is 1250D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
UTILITY STITCHES ■ For a seam allowance on the left side Align the left side of the presser foot with the edge of the fabric, and sew using stitch 22 . 1 When sewing with a seam allowance, align the left edge of the narrow part of the 1/4 inch quilting foot with the fabric edge. a 7 mm (1/4 inch) Memo z To change the width of the seam allowance (needle position), adjust the stitch width. For details, refer to "Adjusting the stitch width" (page 58). ■ Using the optional 1/4 inch quilting foot If the 1/4 inch quilting foot is used, seams can be sewn with a seam allowance of 6.4 mm (1/4 inch). Baste or pin along the seam allowance of the a fabric that you wish to piece together. Attach the 1/4 inch quilting foot. b 1 a Seam (3.2 mm (1/8 inch)) Start sewing. e When the end of the stitching is reached, stop f the sewing machine. Sew until the mark at the lower edge of the 1/4 inch quilting foot aligns with the lower edge of the fabric. 1 2 3 a 6.4mm (1/4 inch) b End of stitching c Mark on 1/4 inch quilting foot • For details, refer to "Replacing the presser foot" (page 44). Select stitch 3 . c Align the mark at the upper edge of the 1/4 d inch quilting foot with the upper edge of the fabric. Align the right edge of the fabric with the right edge of the narrow part of the 1/4 inch quilting foot. 1 2 a Mark on 1/4 inch quilting foot b Beginning of stitching 108