Brother International Innov-is 1250D Operation Manual - Page 47
Overcasting foot G
View all Brother International Innov-is 1250D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Place a different presser foot below the holder e so that the presser foot pin is aligned with the Raise the presser foot lever to check that the g presser foot is securely attached. notch in the holder. Position the presser foot so the letter indicating the presser foot type (A, G, I, J, M, N or R) is positioned to be read. 1 1 4 2 J 3 a Presser foot holder b Notch c Pin d Presser foot type Slowly lower the presser foot lever so that the f presser foot pin snaps into the notch in the presser foot holder. Note z When a stitch is selected, the icon for the presser foot that should be used appears in the screen. Check that the correct presser foot is attached before starting to sew. If the wrong presser foot is installed, turn off the sewing machine, attach the correct presser foot, and then select the desired stitch again. a b c d a Presser foot lever b Presser foot holder c Notch d Pin X The presser foot is attached. Buttonhole foot "A" Overcasting foot "G" Zigzag foot "J" Button fitting foot "M" Monogramming foot "N" Blind stitch foot "R" Side cutter "S" z For details on the presser foot that should be used with the selected stitch, refer to "Stitch Setting Chart" (page 70). Replacing the Presser Foot 45