Brother International Innov-is 1250D Operation Manual - Page 171
Appliquéing
View all Brother International Innov-is 1250D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 171 highlights
Appliquéing Prepare the base fabric and the appliqué fabric (appliqué piece). Press (Settings key), and set the thread color display to NAME OF COLOR, so "APPLIQUE MATERIAL", "APPLIQUE POSITION" and "APPLIQUE" are displayed on the screen. Remove the fabric from the embroidery frame, d and cut it out along the cut-out line. Cut carefully along the stitching and remove the thread. Select an appliqué pattern. a • If it is not cut right on the stitching, it will not be finished neatly. Stretch the base fabric on the embroidery e frame. When "APPLIQUE MATERIAL" is displayed on b the screen, apply iron-on stabilizer to the back of the appliqué piece fabric, and stretch it on the embroidery frame. Set up the thread for appliquéing. f Lower the presser foot lever, and press g ("Start/Stop" button). X The position for the appliqué is stitched, and the sewing machine stops. 4 Lower the presser foot lever, and press c ("Start/Stop" button). X The cut-out for the appliqué piece is sewn, and the sewing machine stops. 1 1 2 a Appliqué position b Base fabric X "APPLIQUE" will be displayed on the screen. 2 a Cut-out line b Appliqué piece fabric X "APPLIQUE POSITION" will be displayed on the screen. Apply a thin layer of fabric glue or spray h adhesive to the back of the appliqué piece, and attach it in the appliqué position. Embroidering 169