Brother International Innov-is 1250D Operation Manual - Page 53
Selecting stitching
View all Brother International Innov-is 1250D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Selecting stitching Stitches are selected using LCD operations. There are 71 utility stitches. Right after turning the power on, the straight stitch (left needle position) is selected. The machine can also be set to select the straight stitch (center needle position). For details on changing the setting, refer to page 21. Determine the stitch to be used, and get the a matching presser foot ready. 2 • Refer to "Stitch Setting Chart" (page 70). Example: 11 is selected: Attach the presser foot. b The machine comes with zigzag foot "J" attached. • For details, refer to "Replacing the presser foot" (page 44). CAUTION ● Use the presser foot appropriate for the stitch. If the wrong presser foot is used, the needle may hit the presser foot and break or bend. X The stitch is selected, and the stitch number and settings are displayed. If necessary, specify the setting for automatic e reverse/reinforcement stitching and adjust the stitch length, etc. Turn on the sewing machine. c X The straight stitch (left needle position) is shown selected in the LCD. • When an animation is displayed on the screen, touch the screen with your finger. Select a stitch. d (Previous page key) displays the previous screen, and (Next page key) displays the next screen. Memo z Uses of stitches and other stitch selections are explained in "UTILITY STITCHES" (page 69). z Automatic reverse/reinforcement stitching and other settings are explained in "Useful Functions" (page 61). z The procedures for specifying the thread tension are described in "Adjusting the thread tension" (page 59). z Procedures for changing the stitch width and length are described in "Adjusting the stitch width" (page 58) and "Adjusting the stitch length" (page 59). Note z When a stitch is selected, the icon for the presser foot that should be used appears on the screen. For details, refer to "Replacing the presser foot" (page 44). Check that the correct presser foot is attached before starting to sew. If the wrong presser foot is installed, turn off the sewing machine, attach the correct presser foot, and then select the desired stitch again. Sewing 51