Brother International Innov-is 1250D Operation Manual - Page 201
button is pressed
View all Brother International Innov-is 1250D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 201 highlights
Symptom Probable Cause Remedy Reference The sewing lamp The sewing lamp is damaged. does not come on. The machine is not turned on. Contact your retailer or the nearest authorized service center. Turn on the machine. - page 19 Nothing appears in the LCD. The brightness of the LCD is either too light or too dark. Adjust the brightness of the LCD. page 204 Machine does not operate when button is pressed. An animation is displayed on the LCD. Touch the LCD with your finger, and the animation will disappear. page 20 Embroidery unit does not move. No pattern selected. The embroidery unit is not set up correctly. Select a pattern. Set the embroidery unit up correctly. page 159 page 150 The fabric is not fully stretched on the embroidery frame. The fabric is loose. Stretch the fabric properly on the embroidery frame. page 154 No stabilizer material is attached. Always use stabilizer material for embroidery with stretch fabrics, thin fabrics, fabrics with a loose weave and fabrics where stitches easily contract. page 153 The thread is tangled and the bobbin case, etc., is plugged up. Remove the tangled thread. When the bobbin case is plugged up, clean the race. page 184 The thread tension is incorrect. Adjust the tension of the upper thread. 5 page 173 Embroidery not neatly done. Objects are placed near the carriage or embroidery frame. If the embroidery unit carriage or embroidery frame bumps into objects, the pattern will be misaligned. Do not place objects within the range of embroidery frame motion. page 151 Stretch the fabric on the frame once Material coming out of the again so that the material coming out embroidery frame is causing of the embroidery frame does not - problems. cause problems, rotate the pattern and embroider. If embroidery is done with the fabric A heavy fabric is being hanging off the table, the embroidery embroidered, and the fabric is unit movement will be impaired. - hanging off the table. Support the fabric while embroidering. The fabric is catching. It is pinched. Stop the sewing machine and set the fabric up correctly. - The carriage was moved while the embroidery frame was being removed or attached during embroidery. If the carriage is moved during the process, the pattern may be misaligned. Be careful when removing or attaching the embroidery frame. - Troubleshooting 199