Brother International Innov-is 1250D Operation Manual - Page 208
is completed.
View all Brother International Innov-is 1250D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 208 highlights
APPENDIX Upgrading Your Machine's Software Using USB Media You can use USB media and a computer to download software upgrades for your sewing machine. When an upgrade program is available on our website at " http://support.brother.com ", please download the file(s) following the instructions on the website and steps listed below. Note z When using USB media to upgrade the software, check that no data other than the upgrade file is saved on the USB media being used before starting to upgrade. z Upgrade file can be recalled from a USB flash drive (USB flash memory) of any size. Memo z When the machine's software is upgraded, saved combinations of character and decorative stitches are erased. However, saved embroidery patterns are not erased. Press and hold the (Settings key) while a turning on the machine. X The following screen appears. Note z When using USB media equipped with an access indicator, the access indicator will begin flashing after the media is inserted into your computer or machine, and may take about 5 to 6 seconds before the media is recognized. (The length of time differs depending on the USB media.) Insert the USB media into the USB port on the b machine. The media device should only contain the upgrade file. Press . c X The following screen appears. a USB port for media b USB media 206 Note z If an error occurred, a text error message will appear. At this time, turn the machine off, and then start the procedure again from step a. When the following screen appears, upgrading d is completed. Remove the USB media, and turn the machine e off and on again.