Brother International Innov-is 1250D Operation Manual - Page 59
Needle Position button once to raise
View all Brother International Innov-is 1250D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Using the thread cutter When sewing with nylon or metallic threads, or other special threads, use the thread cutter on the side of the machine to cut the threads. When you wish to finish the stitching and the a sewing machine is stopped, press ("Needle Position" button) once to raise the needle. 2 a "Needle Position" button X The needle is raised. Raise the presser foot lever. b a Presser foot lever Pull the fabric to the left side of the machine, c and then pass the threads through the thread cutter to cut them. 1 a Thread cutter Sewing 57
2
Sewing
57
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
■
Using the thread cutter
When sewing with nylon or metallic threads, or
other special threads, use the thread cutter on the
side of the machine to cut the threads.
a
When you wish to finish the stitching and the
sewing machine is stopped, press
(“Needle Position” button) once to raise the
needle.
a
“Needle Position” button
X
The needle is raised.
b
Raise the presser foot lever.
a
Presser foot lever
c
Pull the fabric to the left side of the machine,
and then pass the threads through the thread
cutter to cut them.
a
Thread cutter
1