Brother International IntelliFax-1360 Users Manual - English - Page 84
Transferring your faxes or Fax Journal report, Transferring faxes to another fax machine, machine - wrong paper
View all Brother International IntelliFax-1360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Error Message Paper Jam Cause Paper is jammed in the machine. Print Unable XX The machine has a mechanical problem. Scan Unable XX -OR- A foreign objects such as a clip or ripped paper is in the machine. Wrong Paper Size Paper is not the correct size. Action Open the Upper and Lower Jam Clear Covers (at back of machine) and remove the jammed paper. (See Printer jam or paper jam on page 72.) Open the Upper Jam Clear Cover and remove any foreign objects inside the machine. If the error message continues, see Transferring your faxes or Fax Journal report on page 70 before disconnecting the machine so you will not lose any important messages. Then, disconnect the machine from the power for several minutes and then reconnect it. Load the correct size of paper (Letter, Legal or A4), and then press Start. Transferring your faxes or Fax Journal report B If the LCD shows: Change Unable XX Clean Unable XX Init Unable XX Print Unable XX Scan Unable XX we recommend transferring your faxes to another fax machine. (See Transferring faxes to another fax machine on page 70.) You can also transfer the Fax Journal report to see if there are any faxes you need to transfer. (See Transferring Fax Journal report to another fax machine on page 71.) Note If there is an error message on the machine's LCD, after the faxes have been transferred, disconnect the machine from the power source for several minutes, and then reconnect it. Transferring faxes to another fax machine B If you have not set up your Station ID you cannot enter fax transfer mode. a Press Stop/Exit to interrupt the error temporarily. b Press Menu, 9, 0, 1. c Do one of the following: If the LCD shows No Data, there are no faxes left in the machine's memory. Press Stop/Exit. If the LCD shows Enter Fax No., enter the fax number to which faxes will be forwarded. d Press Start. 70