Brother International PT-D600 Users Guide - Page 19

EDITING A LABEL Entering and Editing Text „ Entering Text from the Keyboard ( ) Î / [Create Label] Î ( ) or ( ) Î Enter the character. „ Adding a New Line Move the cursor to end of the current line and press ( ). Line 1 Line 2 Label image NOTE • There is a maximum number of lines of text that can be entered for each tape width. A maximum of 7 lines for 0.94" (24 mm) tape, 5 lines for 0.70" (18 mm) tape, 3 lines for 0.47" (12 mm) tape, 2 lines for 0.35" (9 mm) and 0.23" (6 mm) tape, and 1 line for 0.13" (3.5 mm) tape. • When [Input Mode] is set to [Label View], if you press ( ) to add a new line and there is already a maximum number of lines of text that can be entered for the tape you are using, [Too Many Lines!] is displayed. When [Input Mode] is set to [Print Preview], if you press ( ) and seven lines already exist, [Too Many Lines!] is displayed. Press ( ) or any other key to clear the error message. „ Adding a New Block To create a new block of text/lines to the right of your current text, press ( ) and ( ). The cursor moves to the start of the new block. NOTE • A maximum of 5 blocks can be entered in one label. • If you press ( ) and ( ) when five blocks already exist, [Too Many Blocks!] is displayed. Press ( ) or any other key to clear the error message. „ Deleting Text By pressing ( ), the letters will be deleted one by one. To delete all text: ( ) Î / [Text Only] Î ( ) or ( ). 16 Entering and Editing Text