Brother International PT2400 Users Manual - English and Spanish - Page 11
Connecting The P-touch To A Computer - interface cable
UPC - 012502525912
View all Brother International PT2400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
CONNECTING THE P-TOUCH TO A COMPUTER This machine is equipped with an interface connector, allowing you to print labels and stamps that you have created with the P-touch Editor software installed on your IBM PC-compatible computer or Macintosh. To connect the P-touch to the computer: 1 Turn off both the P-touch and the computer. 2 Insert the small plug on the interface cable into the interface connector on the right side of the P-touch. Only use the interface cable designed exclusively for this machine. 3 On an IBM PC-compatible: Insert the 9-pin plug into the serial (COM) port of your computer and tighten the screws to lock it into place. On a Macintosh: Insert the 8-pin plug into the printer (serial) port of your computer. 4 Turn on the P-touch, and then start up the computer. Interface 5 Hold down Code and press ? to enter Interface mode. .' In Interface mode, the baud rate of the P-touch can be changed by holding down Style Code and pressing $ until the desired setting appears (57600 bps, 115200 bps, 4 or 9600 bps). Release the keys to apply the desired setting. 7