Brother International PT2400 Users Manual - English and Spanish - Page 86
Size & Width Functions
UPC - 012502525912
View all Brother International PT2400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
SIZE & WIDTH FUNCTIONS The character size can be adjusted using both the Size and Width functions. Since the character size that can be used depends on the width of the tape, the following table shows the character sizes that can be used with each tape width. Tape widths 1/4" (6 mm) 3/8" (9 mm) 1/2" (12 mm) 3/4" (18 mm) 1" (24 mm) Sizes (in points) 6, 9, 12 6, 9, 12, 18 6, 9, 12, 18, 24 6, 9, 12, 18, 24, 36 6, 9, 12, 18, 24, 36, 48 The default size setting is AUTO and the default width setting is MEDIUM. The currently selected size setting is always shown by the indicator above the display. In addition, all of the size indicators light up when the AUTO setting is selected. When either the NARROW or WIDE width setting is selected, the Width indicator lights up. With the AUTO size setting, the machine compares your text with the width of the installed tape and automatically adjusts the characters to the largest possible size. However, seven other point sizes are also available and each can be printed in narrow or wide characters. Refer to Reference at the end of this section for samples of the available settings. With the AUTO setting selected and 1" (24-mm)-wide tape installed, text consisting of only capital letters will be printed with a character size of 60 point. 82