Brother International RH-981A Instruction Manual - English - Page 16
Raising the machine head, INSTALLATION
![]() |
View all Brother International RH-981A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
3. INSTALLATION Raising the machine head When machine head is lowered 2983Q When machine head is raised 2984Q 1. While holding the handles of the machine head (1) with both hands, gently raise the machine head. Note: Be sure to turn the power supply off before raising the machine head. 2. If you wish to keep the machine head in the raised position, insert the head support lever (2) securely into the hinge lever support shaft (3). Note: Always check that the head support lever (2) and the hinge lever support shaft (3) are meshed. Lowering the machine head Pull the machine head down toward you gently, remove the head support lever (2) from the hinge lever support shaft (3), and then gently lower the machine head. Note: Do not hold the machine head by the feed bracket (4) or X feed shaft A (5) when it is being raised and lowered. RH-981A 9
![](/manual_guide/products/brother-international-rh981a-instruction-manual-english-17969cb/16.png)