Brother International RH-981A Instruction Manual - English - Page 7
Changing Functions Using, The Memory Switches, The Dip Switches, List Of Error Codes, Troubleshooting
View all Brother International RH-981A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
9-5. Adjusting the clearance between the looper and needle 58 9-6. Adjusting the needle guard 59 9-7. Adjusting the spreader mounting positions ........ 59 9-8. Adjusting the spreader timing 60 9-9. Adjusting the needle racking width (stitch width 60 9-10.Changing the knife cutting length (Replacing the hammer 61 9-11.Adjusting the contact between the knife and the hammer 62 9-12.Replacing the knife 63 9-13. Adjusting the cutting pressure 63 9-14. Adjusting the position of the work clamp plate 64 9-15. Adjusting the cloth opening amount 65 9-16. Adjusting the trimming of the upper thread 66 9-17. Adjusting the trimming of the lower thread and gimp 66 9-18.Adjusting the gimp length after trimming (-02, -52 specifications 67 9-19.Lower thread presser (-02, -52 specifications 67 9-20.Auxiliary clamp arm (-02, -52 specifications 68 9-21.Adjusting the cloth feeding speed (-52 specifications 68 9-22. Adjusting the cloth feed bar home position (-52 specifications 69 9-23.Adjusting the indexer hole spacing (-52 specifications 70 9-24.Adjusting the position of limit switch L (-52 specifications 71 9-25.Adjusting the position of limit switch R (-52 specifications 71 10. CHANGING FUNCTIONS USING THE MEMORY SWITCHES 72 10-1.Memory switch table 73 11. CHANGING FUNCTIONS USING THE DIP SWITCHES 74 11-1. Panel DIP switches 74 11-2. Circuit board DIP switches 75 12. LIST OF ERROR CODES 77 13. TROUBLESHOOTING 80 RH-981A