Brother International TD-2120N Users Guide - Page 100
Choosing Your Wireless Installation Method
View all Brother International TD-2120N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
Chapter 11 If you have previously configured the printer's wireless settings, you must reset the network settings before you can configure the wireless settings again. 1 Press and hold the (Power) button to turn the printer off. 2 Press and hold the (Feed) button and the (Power) button until the POWER indicator lights in orange and the STATUS indicator blinks in green. 3 While holding down the (Power) button, press the (Feed) button 2 times. 4 Release the (Power) button. NOTE In order to obtain the maximum data transfer speed in a WLAN environment, check for the following: • Use this printer as close as possible to the access point/router. • Make sure that there are no obstacles between this printer and the access point/router. Large objects and walls may make it difficult to establish a connection. • Other electronic devices may cause interference. This may decrease the data transfer speed. In such an environment, there may be a decrease in the speed, compared to a wired LAN or USB connection. If a wired LAN or USB connection is used, the maximum processing speed may be achieved. Choosing Your Wireless Installation Method 11 There are two methods for specifying wireless LAN settings. Choose the method that you prefer for your environment. Configuration using the installer CD-ROM and temporarily using a USB cable (page 94) One-push configuration using WPS (page 99) If the printer is on an enterprise wireless network (such as LEAP and EAP-FAST) , connect the printer via USB to configure its wireless settings. NOTE Information is available for specifying settings with methods other than the two described here. For details, see the Network User's Guide included on the CD-ROM. Configuration Using the Installer CD-ROM and Temporarily Using a USB Cable 11 If this method will be used, we recommend using a USB cable to connect this printer to a computer already wirelessly connected to the desired network. 94