Brother International TD-2120N Users Guide - Page 68
Turn off the printer., Does the rechargeable battery have a low charge? when
View all Brother International TD-2120N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Chapter 7 Problem The indicators show that error 1 has occurred. (continued) The indicators show that error 2 has occurred. Solution If the error still occurs, check for the following: Tape exceeding 39.37" (1 m) or incompatible files cannot be printed. When sending a template as a BLF file, an error is indicated if the model name in the file is different. When printing a template, an error is indicated if the specified template does not exist. An error is indicated if the search of a template with a linked database fails. An error is indicated if data is transferred, causing the capacity of the user storage area to be exceeded. In these cases, turn off the printer, and then turn it on again. If the error still occurs, contact Brother Customer Service. Has a device been connected that is not supported by the USB host port? An overcurrent was detected by the USB host port, or the connection of an unsupported device was detected. Turn off the printer, and then check the connected device. If a USB hub is connected, the printer will automatically turn off after a certain length of time has passed. Is the printer in mass storage mode? An error is indicated if the file system becomes corrupted or a file is copied while a mass storage file is being processed. Turn off the printer. Does the rechargeable battery have a low charge? (when using the optional rechargeable Li-ion battery). Use the AC adapter. Has the rechargeable battery failed to recharge? (when using the optional rechargeable Li-ion battery). If the battery has not been recharged after a certain length of time, recharging has failed. Use the AC adapter. Has the wireless LAN or Bluetooth connection been interrupted? (when using the optional WLAN or Bluetooth interfaces). The wireless LAN or Bluetooth connection established while the printer is on was interrupted. Turn off the printer, check that the slide switch for the WLAN interface or Bluetooth interface has been turned on, and then turn the printer on again. 62