Brother International TD-2120N Users Guide - Page 83
Setting the Administrator Password
View all Brother International TD-2120N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Using the Touch Panel Display (Optional:PA-TDU-001) (TD-2120N/2130N only) e Press [a] or [b] to select AM, PM or 24, and then press the number keys to specify two digits each for the hour and minutes. To enter 2:45 in the AM/PM format, press [b] to select [PM], and then press [c], then [0] [2] [4] [5]. f Press [OK]. The main screen appears, and the specified time and date are displayed. NOTE The format for the time and date can be changed. Press [ ] (admin key), select [Setup], then [Time&Date Form] from the parameters, and then specify settings for [Date Format] and [Time Format]. Setting the Administrator Password 10 A password can be set so that basic settings specified by pressing [ ] (admin key) cannot easily be accessed. If a password is set, each time [ ] (admin key) is pressed, a password must be entered. Access to these parameters can be restricted by setting a password. a Press [ ] (admin key). b Press [b], select [Admin Password], and then press [OK]. c Press [b], select [On], and then press [OK]. The password input screen appears. d Type in the 4-digit password, and then press [OK]. The password is set. NOTE 10 • This parameter can be accessed only when touch panel A (basic control panel) is set. • After a password has been set, the password input screen appears when [ ] (admin key) is pressed. Type in the specified 4-digit password, and then press [OK]. • To cancel the password settings, press [ ] (admin key), type in the password to display the parameters, and then set [Admin Password] to [Off]. • If you do not remember the password, use [Device settings] in the "Printer Setting Tool" to return all settings to their factory defaults or specify the password again and apply it. For details, see Device Settings on page 34. 77