Brother International TD-2120N Users Guide - Page 19
Button Functions, Printer Setting Tool
View all Brother International TD-2120N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Printing Button Functions 2 (Power) button functions Turn the printer on Turn the printer off Operation While the printer is turned off, press the (Power) button. The POWER indicator turns on. 2 While the printer is turned on, press and hold the (Power) button until the POWER indicator turns off. (If the [Auto Power Off] function is specified in [Device settings] of the "Printer Setting Tool", the printer will turn off automatically after the specified period of inactivity.) (Feed) button functions Feed the paper Establish a wireless LAN connection (WPS) (TD-2120N/2130N only) Switch the Bluetooth connection (TD-2120N/2130N only) Operation When the paper type is set to [Die-cut Label] or [Media With Marks]: Press the (Feed) button to automatically feed the paper to the print position. When the paper type is set to [Continuous Length Tape]: Press the (Feed) button to feed the paper about 1" (25.4 mm). The default setting is [Continuous Length Tape]. Use [Paper Size Setup] of the "Printer Setting Tool" to register the paper size information with the printer. For details, see Registering Paper Size Information With the Printer on page 9. With the wireless LAN connection enabled, press and hold (5 seconds) this button to easily establish a wireless LAN connection and install the printer driver. However, your WLAN access point/router must support Wi-Fi Protected Setup (WPS). For details, see One-Push Configuration Using WPS on page 99. With the wireless LAN connection disabled, press and hold (5 seconds) this button to switch between enabling and disabling the Bluetooth connection. For details, see Connecting the Computer and Printer by Bluetooth on page 104. (Print) button functions Operation Perform the specified operation With the printer idle, press this button to perform the operation specified in [Device settings] of the "Printer Setting Tool". For details, see Print Key Function on page 36. Print the printer setup information Make sure that a roll is installed, and then hold down (at least 1 second) the (Print) button to begin printing the printer setup information. For details, see Printing the Printer Setup Information on page 19. Execute a file stored in the mass With the printer in mass storage mode, press this button to execute a storage area command file stored in the mass storage area. Resetting the incrementing field Hold down the (Print) button for at least 5 seconds, until the POWER and STATUS indicators blink 3 times in orange. 13