Brother International TD-2120N Users Guide - Page 21
Inserting the RD Roll
View all Brother International TD-2120N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Inserting the RD Roll 2 Use genuine Brother roll media. Genuine Brother fanfold media is not available at this time. a Press and hold the (Power) button to turn the printer off. Press the cover release lever (1) on either side and lift up to open the RD Roll compartment top cover. Printing c Insert an RD Roll into the RD Roll compartment, and then close the RD Roll compartment top cover. For an RD Roll 1 Insert the RD Roll so that the 2 labels feed with the side to be printed on facing up (1), as shown. 1 1 b Open the media guides by lifting up the media guide adjustment lever (1) and pulling the media guides outwards. 1 NOTE The media guides are shipped fully open from the factory. Use RD Rolls with an outer roll dimension of 5" (127 mm) or less. Use RD Rolls designed for TD series printers. Regardless of the size, some RD Rolls may not be usable. Insert the RD Roll facing the correct direction. If the RD Roll is not inserted correctly, the printer will not print on the correct side of the paper or label. When using media with the labels rolled up on the inside, insert the roll in the opposite direction of that shown in sub-step 1 of step c so that the print side of the labels will face up. 15