Canon EOS 30D EOS 30D Instruction Manual - Page 93

Setting Exposure CompensationN Exposure compensation is used to alter the standard exposure setting set by the camera. You can make the image look lighter (increased exposure) or darker (decreased exposure). You can set the exposure compensation up to ±2 stops in 1/3-stop increments. Increased exposure Decreased exposure 1 Turn the Mode Dial to any Creative Zone mode except . 2 Check the exposure level indicator. Press the shutter button halfway and check the exposure level indicator. 3 Set the exposure compensation amount. Set the switch to , and while looking at the viewfinder or LCD panel, turn the dial. Turn the dial either while pressing the shutter button halfway or within (0) after pressing the shutter button halfway. To cancel the exposure compensation, set the exposure compensation amount back to . Standard exposure index Exposure level mark Decreased exposure 4 Take the picture. Increased exposure The exposure compensation amount will remain in effect even after the switch is set to . If the standard exposure setting is 1/125 sec. and f/8.0, setting the exposure compensation amount to plus or minus one stop will be the same as setting the shutter speed or aperture as follows: Shutter speed Aperture -1 stop ← 0 → +1 stop 250 ← 125 → 60 11 ← 8.0 → 5.6 Take care not to turn the dial and change the exposure compensation inadvertently. To prevent this, turn the switch to . 93