Canon EOS C700 User Manual - Page 103
button battery has some charge left, even if you disconnect all other power sources.
View all Canon EOS C700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
Setting the Time Code NOTES • The frames value of the time code runs from 0 to 23 (frame rate set to 23.98P or 24.00P), from 0 to 24 (frame rate set to 25.00P, 50.00i or 50.00P), or from 0 to 29 (all other frame rates). • When you mix drop frame and non-drop frame time codes, there might be a discontinuity in the time code at the point where the recording starts. • When you are using the [Free Run] running mode, the time code will continue running as long as the lithium button battery has some charge left, even if you disconnect all other power sources. • If you set an assignable button to [Time Code] (A 127), you can press the button to open the [Time Code] submenu in the monitoring menu. 103
103
Setting the Time Code
NOTES
NOTES
•
The frames value of the time code runs from 0 to 23 (frame rate set to 23.98P or 24.00P), from 0 to 24 (frame
rate set to 25.00P, 50.00i or 50.00P), or from 0 to 29 (all other frame rates).
•
When you mix drop frame and non-drop frame time codes, there might be a discontinuity in the time code at
the point where the recording starts.
•
When you are using the [Free Run] running mode, the time code will continue running as long as the lithium
button battery has some charge left, even if you disconnect all other power sources.
•
If you set an assignable button to [Time Code] (
A
127), you can press the button to open the [Time Code]
submenu in the monitoring menu.