Canon EOS C700 User Manual - Page 210
Cannot use Wi-Fi., the camera and let it cool down before attaching it again.
![]() |
View all Canon EOS C700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 210 highlights
Troubleshooting 210 Unable to complete WPS. Try the operation again. - More than 2 minutes passed between activating WPS on the access point and pressing [OK]/pressing SET on the camera. Start over the WPS procedure from the beginning. - The WPS button was not held down long enough. Refer to the instruction manual of your wireless router. When using WPS to make a wireless connection, keep the WPS button held down until the wireless router's WPS function is activated. Unable to connect - Could not connect to the access point or network device selected. - Cordless phones, microwave ovens, refrigerators and other appliances may interfere with the wireless signal. Try using the camera in a location farther away from such appliances. Unable to obtain an IP address - If you are not using a DHCP server, enter the IP address manually (A 165). - Turn on the DHCP server. If it is already on, make sure it is functioning properly. - Make sure the address range for the DHCP server is sufficient. WFT's temperature too high. Cannot use Wi-Fi. - Wi-Fi functions have been turned off because the transmitter's temperature is too high. Remove the transmitter from the camera and let it cool down before attaching it again. Wi-Fi authentication unsuccessful - Check the access point's authentication/encryption method and password (encryption key) and change the camera Wi-Fi settings (A 160) as necessary. Wi-Fi error. Incorrect authentication method. - Check the access point's authentication/encryption method and change the camera Wi-Fi settings (A 160) as necessary. Wi-Fi error. Incorrect encryption method. - Make sure the camera and access point are using the same authentication/encryption method.
![](/manual_guide/products/canon-eos-c700-user-manual-cfde7ba/210.png)