Canon EOS Rebel T6i EF-S 18-55mm IS STM Lens Kit Instruction Manual - Page 321

Preparing to Print 6 Play back the image.  Press the button.  The image will appear with the icon on the upper left of the screen to indicate that the camera is connected to a printer.  Before using the printer, make sure it has a PictBridge connection port.  Movies cannot be printed.  The camera cannot be used with printers compatible only with CP Direct or Bubble Jet Direct.  Do not use any interface cable other than the one provided.  If there is a long beeping sound in step 5, it indicates a problem with the printer. Resolve the problem displayed in the error message (p.328).  If any of the following shooting modes or functions is set, the camera cannot be connected to a printer. Cancel all the relevant settings, then reconnect the camera to the printer with an interface cable. • or in mode • Multi Shot Noise Reduction • [51: Wi-Fi/NFC] set to [Enable]  You can also print RAW images taken with this camera.  When you use a battery to power the camera, make sure it is fully charged. With a fully-charged battery pack, you can print for approx. 2 hr.  Before disconnecting the cable, first turn off the camera and printer. Hold the plug (not the cord) to pull out the cable.  For direct printing, using the DC Coupler DR-E18 (sold separately) and AC Adapter AC-E6N (sold separately) to power the camera is recommended. 321