Canon EOS Rebel T6i EF-S 18-55mm IS STM Lens Kit Instruction Manual - Page 353

H Using Eye-Fi Cards 5 Check the [Access point SSID:].  Check that an access point is displayed for [Access point SSID:].  You can also check the Eye-Fi card's MAC address and firmware version.  Press the button three times to exit the menu. 6 Take the picture.  The picture is transferred and the icon switches from gray (not connected) to one of the icons below.  For transferred images, O is Transmission status icon displayed in the shooting information display (p.306). H (Gray) Not connected : No connection with access point. H (Blinking) Connecting...: Connecting to access point. H (Illuminated) Connected: Connection to access point established. H () Transferring... : Image transfer to access point in progress. Cautions for Using Eye-Fi Cards  If [51:Wi-Fi/NFC] is set to [Enable], image transfer with an Eye-Fi card is not possible.  If "J" is displayed, an error occurred while retrieving the card information. Turn the camera's power switch off and on again.  Even if [Eye-Fi trans.] is set to [Disable], it may still transmit a signal. In hospitals, airports, and other places where wireless transmissions are prohibited, remove the Eye-Fi card from the camera.  If the image transfer does not function, check the Eye-Fi card and computer settings. For details, refer to the card's instruction manual.  Depending on the wireless LAN's connection conditions, the image transfer may take longer or it may be interrupted.  The Eye-Fi card may become hot as it transmits.  The battery power will be consumed faster.  During the image transfer, auto power off will not take effect.  If you insert a wireless LAN card other than an Eye-Fi card, [Eye-Fi settings] will not appear. Also, the transmission status icon will not appear. 353