Canon EOS Rebel T6i EF-S 18-55mm IS STM Lens Kit Instruction Manual - Page 47
Attaching a Lens Hood, and lens edges, then turn
View all Canon EOS Rebel T6i EF-S 18-55mm IS STM Lens Kit manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Attaching and Detaching a Lens Attaching a Lens Hood A lens hood can block unwanted light and prevent rain, snow, dust, etc. adhering to the front of the lens. When storing the lens in a bag, etc., you can also attach the hood in reverse. If there is no index mark on the lens and hood: Attach the lens hood. Turn the hood as shown by the arrow to attach it securely. If there is an index mark on the lens and hood: 1 Align the red dots on the hood and lens edges, then turn the hood as shown by the arrow. 2 Turn the hood as shown in the illustration. Turn the hood clockwise until it attaches securely. If the hood is not attached properly, it may obstruct the image's periphery, making the image look dark. When attaching or detaching the hood, grasp the base of the hood to turn it. Grasping the hood's edges to turn it may deform the hood, resulting in failure to turn. When using the camera's built-in flash, detach the hood. Otherwise, the hood will obstruct part of the flash. 47