Canon FAXPHONE L170 Basic Guide - Page 59

Paper Handling 2 Insert the envelope straightly in the multi-purpose feeder with the print side up and the right edge (i.e., closer to the stamp) first. Envelopes with a flap on the short edge cannot be used. 3 Specify the paper size. ❑ Press [Menu] ➞ press [Set]. ❑ Press [ (-)] or [ (+)] to select ➞ press [Set] twice. 4 ❑ Press [ (-)] or [ (+)] to select ➞ press [Set]. ❑ Press [ (-)] or [ (+)] to select the appropriate envelope type ➞ press [Set] twice. NOTE You can select instead of as the paper size. When is selected, you can specify vertical and horizontal sizes of the envelope in the following ranges: - : 127 mm to 356 mm (5" to 14") - : 76 mm to 216 mm (3" to 8 1/2") 4 Specify the paper type. ❑ Press [ (-)] or [ (+)] to select or ➞ press [Set]. ❑ Press [Stop/Reset] to return to standby mode. Testing the Machine After you have assembled your machine, installed the toner cartridge, loaded paper, you can make sure the machine is printing properly by making several copies of a document. For instructions, see Chapter 10, "Making Copies." Note the following: • If the printed sheets are curled as they exit the machine, remove them from the output slot immediately to avoid paper jams. • Make sure your text or graphics fall within the printable area. 4-10 Loading Paper