Canon FAXPHONE L80 FAXPHONE L80 User's Guide - Page 168

LCD Messages The following messages are displayed in the LCD when the machine is performing a task, or when it encounters an error. The error code appears in the ACTIVITY REPORT (1 p. 11-3). Message AUTO REDIAL Error Code Cause Action - The machine is waiting to Wait for the machine to redial the other party's automatically redial the fax fax number because the number (1 p. 7-9). line was busy or the other party did not answer when you tried to send the document. BUSY/NO SIGNAL #018 The fax/telephone number you dialed is busy. Try sending the document at a later time. The fax number dialed was incorrect. Check the fax number and dial again. The other party's fax machine is not working. Contact the other party and have them check their fax machine. The other party is not Contact the other party to using a G3 fax machine. check that they are using a G3 fax machine. The telephone line type setting on your machine is incorrect. Set your machine for your telephone line type (1 p. 3-8). The receiving fax machine did not answer within 55 seconds (after all automatic redialing attempts). Contact the other party and have them check their fax machine. You can try to send the document using manual sending via the handset (1 p. 7-6). For an overseas call, add pauses to the registered number (1 p. 9-2). CHANGE CARTRIDGE - The toner inside the Redistribute the inside the cartridge may be cartridge (1 p. 12-7). If the unevenly distributed. message remains, replace the cartridge (1 p. 12-7). 13-8 Troubleshooting Chapter 13