Canon LV-X2 Owners Manual - Page 30
Video Input
View all Canon LV-X2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
VIDEO INPUT SELECTING THE INPUT SOURCE DIRECT OPERATION Choose Video by pressing the INPUT button on the Top Control or on the Remote Control Unit. If the projector cannot reproduce a proper video source, select correct input source through the MENU OPERATION (see below). INPUT button Video Computer MENU OPERATION 1 Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT button to move the red frame to the INPUT Menu icon. 2 Press the POINT DOWN button to move the red arrow to Video and then press the SET button. The Source Select Menu will appear. 3 Move the red arrow to the source that you want to select and then press the SET button. Auto Video The projector automatically detects incoming the Video signal, and adjusts itself to optimize its performance. • When both VIDEO jack and S-VIDEO jack are connected, S-VIDEO jack has priority over VIDEO jack. • When both Y-Pb/Cb-Pr/Cr jacks and S-VIDEO jack are connected, Y-Pb/Cb-Pr/Cr jacks have priority over SVIDEO jack. When the video input signal is connected to VIDEO jack, select Video. S-Video When the video input signal is connected to S-VIDEO jack, select S-Video. Y,Pb/Cb,Pr/Cr When the video input signal is connected to Y-Pb/CbPr/Cr jacks, select Y, Pb/Cb, Pr/Cr. INPUT MENU VIDEO Move the red arrow to Video and press the SET button. Source Select Menu (VIDEO) Move the red arrow to the source and press the SET button. 30