Canon LV-X2 Owners Manual - Page 31
Selecting The Video System
View all Canon LV-X2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
VIDEO INPUT SELECTING THE VIDEO SYSTEM 1 Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to move the red frame to AV SYSTEM Menu icon. 2 Press the POINT DOWN button to move the red arrow to the system that you want to select and then press the SET button. VIDEO JACK OR S-VIDEO JACK Auto Projector automatically detects the incoming Video system, and adjusts itself to optimize its performance. When Video System is PAL-M or PAL-N, select system manually. PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N If projector cannot reproduce a proper video image, it is necessary to select a specific broadcast signal format among PAL, SECAM, NTSC, NTSC 4.43, PAL-M, and PAL-N. AV SYSTEM MENU (VIDEO OR S-VIDEO) AV SYSTEM Menu icon This box indicates the system being selected. Move the red arrow to the system and press the SET button. Y, Pb/Cb, Pr/Cr JACKS Auto The projector automatically detects the incoming Video signal, and then adjusts itself to optimize its performance. AV SYSTEM MENU (COMPONENT VIDEO) COMPONENT VIDEO SIGNAL FORMAT If the projector cannot reproduce a proper video image, it is necessary to select a specific component video signal format among 480i, 575i, 480p, 575p, 720p, 1035i and 1080i. AV SYSTEM Menu icon This box indicates the system being selected. Move the red arrow to the system and press the SET button. 31