Canon PIXMA MP800R User's Guide - Page 156
Image position and size incorrect when scanning from the machine's
View all Canon PIXMA MP800R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 156 highlights
Image position and size incorrect when scanning from the machine's operation panel Cause Action MP Navigator settings do not match Set the MP Navigator [Document Type] and [Document Size] to match the originals. those of the originals being scanned. For more information, refer to the Scan Guide. Trouble scanning over a wireless or wired LAN/"Cannot communicate with scanner." appears on the screen when using over a wireless or wired LAN Cause Scanner driver (ScanGear MP) not installed. Action Set the Setup CD-ROM and install the software. Scanner is not selected in the application software. Select this machine in [Select Source] or [Import] in your application software. The feature of the application software does not support TWAIN. Make sure that your application software supports TWAIN. You cannot start ScanGear MP from within an application software that does not support TWAIN. The settings of both the access point and the machine are not identical. Check the settings of the access point and modify the settings of machine as same as those of the access point. For information on the access point settings, refer to the access point manual. For information on how to set a WEP/WPA/WPA2 key, refer to "How to set a WEP/WPA/WPA2" of "Troubleshooting" in the Network Guide. The network setting of the computer Make sure that the computer can communicate with the access point. is not correct. The radio status is poor. Adjust the installation positions and the antenna direction while monitoring the radio status with Canon IJ Network Tool. The distance between machine and Relocate the machine and access point as closely together as is possible. access point is too far. There is an obstruction or a source of radio wave interference. Communication between different rooms or floors is generally poor. Adjust the installation locations of the devices. There may be a device such as a microwave oven that is using the same frequency bandwidth as the wireless station. Place the wireless LAN devices as far away from the radio wave interference source as possible. Machine setup is not completed./The Complete the machine setup. If the MP driver is not installed, follow the MP driver is not installed. procedure described in the Setup Guide to install the MP driver. The MAC address filtering or the IP address filtering is configured on the access point. On the access point, additionally register the IP address or MAC address of the machine and the computer, or disable the MAC address filtering or the IP address filtering. 154 Troubleshooting Chapter 12