Canon PIXMA iP6310D Quick Start Guide - Page 26

Troubleshooting Print Quality is Poor or Contains Errors Problem Cannot Print to End of Job Possible Cause The Page Size setting does not match the size of the paper loaded in the printer The size of the print data is too large Ink Does Not Eject Properly/Not Printed/Printing is Blurred/Colors are Wrong/White Streaks Appear FINE Cartridge is not installed properly/ there is no ink left Try This First, check the Page Size setting in the application. Then, check the Page Size setting in the Page Setup tab of the printer driver for Windows or the Page Setup dialog box of the printer driver for Macintosh. Check the size of the print data. For Windows XP and Windows 2000, if the size of the data is too large, part of it may be lost. When the spool format is EMF, follow the procedure below. 1. Open the printer properties dialog box. See "Opening the Printer Properties Dialog Box Directly from the Start Menu" on page 16. 2. On the Page Setup tab, click Print Options. 3. Select the Reduce spool data size check box and click OK. When Reduce spool data size is selected, the print quality may be degraded. Remove the FINE Cartridge, then reinstall it. Small dusts may be stuck between the contact points. In this case, the print out result may be improved by reinstalling the FINE Cartridge. Also, check that the protective tape is removed. * * To the FINE Cartridge holder Protective tape Print head nozzles are clogged Print the nozzle check pattern to ensure that ink is ejected properly. Refer to "Printing the Nozzle Check Pattern" in the Direct Printing Guide. If the ink is not ejected properly: Refer to "Print Head Cleaning" in the Direct Printing Guide. Refer to "Print Head Deep Cleaning" in the Direct Printing Guide. 22