Canon PowerShot A50 PowerShot A50 Hardware Guide - Page 99
Incorrect White Balance setting
View all Canon PowerShot A50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Problem Image is blurred or out of focus Images are too dark Images are too bright Flash will not work Cause(s) Incorrect Slow Shutter setting Solution(s) • Set Slow Shutter to Off. Insufficient ambient light • Ensure that the Flash mode is set to On. Photographic subject is insufficiently illuminated in comparison with surroundings • Adjust the Exposure Compensation mode to a positive "+" setting. Incorrect White Balance setting • Reset the White Balance. Photographic subject is beyond the range of the flash • The effective range of the flash is 6.7 in. to 11.5 ft. (17 cm to 3.5 m). Photographic subject is too close • The effective range of the flash is 6.7 in. to 11.5 ft. (17 cm to 3.5 m). Photographic subject is brighter • Adjust the Exposure Compensation than surroundings function to a negative "-" setting. Light is shining directly on or reflected onto camera from the photographic subject • Change the shooting angle. Camera is set to Flash On mode • Set the camera to the Auto or Flash Off mode. Camera is set to Flash Off mode • Set the camera to the Auto or Flash On mode. 99 Appendices