Canon PowerShot S100 Software Starter Guide DC SD - Page 20
Connecting to a Serial Port COM Port
View all Canon PowerShot S100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
20 Connecting to a Serial Port (COM Port) The serial port interface is only supported by the PowerShot S10 and PowerShot S20 models. 1. Shut down the computer and turn the camera power off. 2. Attach the supplied serial cable to a serial port on the computer and to the camera's DIGITAL terminal as shown below. • Please consult your computer's manual for the location of the serial port. Serial Port (COM Port) Serial Connector Serial Connector DIGITAL Terminal 1. Open the DIGITAL terminal cover by slipping a fingernail under the top edge and pulling down. 2. Insert the connector so that the marks on the connector and camera align. 3. Turn on the computer and start Windows. Precaution for Unplugging Cables from the DIGITAL Terminal • Always press the [PUSH] button on the connector to detach the cable from the camera's DIGITAL terminal. PUSH Button