Canon Pro90 PowerShot Pro90IS Camera User Guide - Page 44
Checking an Image Right after Shooting
![]() |
UPC - 082966162275
View all Canon Pro90 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Checking an Image Right after Shooting Checking the Image The image will show in the LCD monitor for approximately 2 seconds immediately after shooting even if the shutter button is released. You can also view the image with the following procedures. Keeping the Shutter Button Pressed The image will continue to display in the LCD monitor or viewfinder as long as the shutter button is kept fully depressed after shooting. Pressing the Set Button If you press the Set button while the image is displayed in the LCD monitor or viewfinder, it will continue to display even after the shutter button is released. Press the shutter button halfway again to stop displaying it. • There is a shortcut for erasing the image while it is displayed (p. 9). Changing the Image Display Duration The display of the image in the LCD monitor or viewfinder after shooting can be set to Off or the duration changed to 10 seconds. 1 In the [ (Rec.)] menu, select [Review]. • See Selecting Menus and Settings (p. 38). 2 Select a Review setting and press the Menu button. • With the [Off] option, the image will not automatically display. However, you can view it if you keep the shutter button held down. • With the [2 sec.] or [10 sec.] options, the image automatically displays for the set duration even if the shutter button is released. • You can display the image longer than the 2or 10-second duration by keeping the shutter button depressed or by pressing the Set button while it is displayed. • Another picture can be taken even while the last is displayed. 42 Shooting - Letting the Camera Select Settings
![](/manual_guide/products/canon-powershot-pro-90-powershot-pro90is-camera-user-guide-5ca92ad/44.png)