Canon VIXIA HF G30 Instruction Manual - Page 165
List of Messages for Wi-Fi Functions
View all Canon VIXIA HF G30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 165 highlights
Troubleshooting Scene recorded using another device. Cannot copy the scene. Scene recorded using another device. Cannot divide the scene. - Scenes that were not recorded with this camcorder cannot be copied or divided with this camcorder. Some scenes could not be deleted - Movies that were protected/edited with other devices and then transferred to a memory card connected to the computer cannot be deleted with this camcorder. Some scenes were recorded using another device and cannot be copied. - Scenes that were not recorded with this camcorder cannot be copied. Task in progress. Do not disconnect the power source. - The camcorder is updating the memory card. Wait until the operation ends and do not disconnect the compact power adapter or remove the battery pack. This photo cannot be displayed - You may not be able to display photos taken with other devices or image files created or edited on a computer and then transferred to a memory card connected to the computer. To record video on this memory card, it is recommended to use a video quality setting other than [59.94P Recording]. - When using a memory card rated SD Speed Class 2 or 4, you may not be able to record movies if you use a recording mode of 28 Mbps LPCM (59.94P), 28 Mbps (59.94P) or 35 Mbps (59.94P). To use this function change the camera mode to Manual or Cinema - C, the CUSTOM dial (A 91) and some of the functions that can be assigned to the assignable buttons (A 92) cannot be used in mode. Set the mode switch to n ( mode) or E( mode) to use them. Too many photos and MP4 movies. Disconnect the USB cable. - Disconnect the USB cable. Try using a memory card reader or decrease the number of photos and MP4 movies on the memory card to fewer than 2,500 (Windows), or 1,000 (Mac OS). - If a dialog box appeared on the computer screen, close it. Disconnect the USB cable, and restore the connection after a short while. Unable to recognize the data - The camcorder cannot recognize data that was recorded using a video configuration that is not supported (PAL or SECAM). Unable to recover data - Could not recover a corrupted file. Save your recordings (A 108) and initialize the memory card using the [Complete Initialization] option (A 36). 165 List of Messages for Wi-Fi Functions Refer also to the instruction manual of your access point and other devices you will use. Another user is already controlling the camcorder. Try again later. - This message appears on the screen of the Wi-Fi device. Multiple Wi-Fi devices are trying to connect with the camcorder. Make sure only one Wi-Fi device is trying to connect and then touch Retry. IP address conflict - Change the camcorder's IP address to avoid any conflict with devices connected to the same network. Alternatively, change the IP address of the conflicting device.