Canon XA11 XA11 XA15 Instruction Manual - Page 103
<XA15> Selecting the Terminal Used For Output, <XA15> Using the HD/SD-SDI Terminal
View all Canon XA11 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
Connecting to an External Monitor o Selecting the Terminal Used For Output To output your recordings on an external monitor, you must first select which terminal you will use. 1 Open the [Output Terminal] screen. [FUNC.] > [MENU] > q > [Output Terminal] • Touching [FUNC.] is necessary only when performing the procedure in mode. 2 Touch the desired option and then touch [X]. • If you selected [ HD/SD-SDI], [ HD/SD-SDI & HDMI] or [ HDMI], continue with the relevant procedure below to configure the output signal. Options ( Default value) [j Off] There is no output from any terminal. [ HD/SD-SDI] There is output only from the HD/SD-SDI terminal. [ HD/SD-SDI & HDMI] There is output from the HD/SD-SDI and HDMI OUT terminals. [ HDMI] There is output only from the HDMI OUT terminal. [Ò AV OUT] There is output only from the AV OUT terminal. 103 o Using the HD/SD-SDI Terminal The digital signal output from the HD/SD-SDI terminal includes the video signal, audio signal and time code signal. If necessary, perform the following procedure to change the video output signal. 1 Open the [HD/SD-SDI Output] screen. [FUNC.] > [MENU] > q > [HD/SD-SDI Output] • Touching [FUNC.] is necessary only when performing the procedure in 2 Touch the desired option and then touch [X]. mode. NOTES • You can use the [FUNC.] > [MENU] > q > [Output Onscreen Displays] setting to select whether onscreen displays are embedded in the output video signal. Using the HDMI OUT Terminal The HDMITM OUT terminal also offers a digital connection and outputs both a video and audio signal. If you select [k Automatic], the output signal will automatically switch to HD or SD depending on the capability of the external monitor. In mode, the audio output signal will be 2-channel linear PCM audio (16-bit, 48 kHz sampling). 1 Open the [HDMI Output] screen. [FUNC.] > [MENU] > q > [HDMI Output] • Touching [FUNC.] is necessary only when performing the procedure in mode. 2 Touch the desired option and then touch [X].