Canon XA11 XA11 XA15 Instruction Manual - Page 73
Connecting an External Microphone or External Audio Input Source to the Camcorder
View all Canon XA11 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Recording Audio Connecting an External Microphone or External Audio Input Source to the Camcorder In order to use the microphone holder and INPUT 1/INPUT 2 terminals, the handle unit must be attached to the camcorder. 1 Loosen the microphone lock screw (ቢ), open the microphone holder and insert the microphone (ባ). 2 Tighten the lock screw and put the microphone cable through the microphone cable 73 clamp under the microphone holder (ቤ). 3 Plug the microphone or external device's cable into the desired INPUT terminal (ብ) or the MIC terminal (ቦ). INPUT 1/INPUT 2 terminals Microphone lock screw Cable clamp MIC terminal Using Line Input or an External Microphone Connected to an INPUT Terminal 1 Set the INPUT terminal ON/OFF switch to ON. 2 Set the input selection switches for INPUT 1/INPUT 2 to LINE or MIC. • To supply a microphone with phantom power, set the switch to MIC+48V instead. Make sure to connect the microphone first, before turning the phantom power on. Keep the microphone connected when turning off the phantom power.