Canon XA11 XA11 XA15 Instruction Manual - Page 20
Using the Lens Hood and Lens Cap, Using the Viewfinder, mount index mark on the camera
View all Canon XA11 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Preparing the Camcorder Using the Lens Hood and Lens Cap While recording, the supplied lens hood with lens barrier is effective for reducing stray light that can be the cause of lens flare and ghost images. Additionally, closing the lens barrier can help prevent fingerprints and dirt accumulation on the lens. 20 1 Remove the lens cap. 2 Align the mark on the lens hood with the lens hood mount index mark on the camera (ቢ), and then turn the lens hood clockwise until it stops with a click (ባ). • Be careful not to deform the lens hood. • Make sure that the lens hood is aligned with the thread. • To remove the lens hood, turn it counterclockwise. NOTES • Use the supplied lens cap when carrying the camcorder or storing it after use. • Note that the lens cap and the lens hood with lens barrier cannot be used simultaneously. Using the Viewfinder If it is difficult to use the LCD screen, you can use the viewfinder, which can be tilted 45 degrees upward. 1 Close the LCD panel. 2 Pull out the viewfinder. 3 Use the power switch to turn on the camcorder. 4 Adjust the viewfinder using the dioptric adjustment lever. Dioptric adjustment lever