Canon XF305 XF300 / XF305 Instruction Manual - Page 24
Preparing the Power Supply
View all Canon XF305 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
2 Preparations Preparing the Power Supply ቢ ባ ቤ ቢ ባ ቤ 6 Unplug the power cord from the power outlet and disconnect it from the compact power adapter. NOTES • To charge the battery pack, disconnect the DC cable from the compact power adapter. • The supplied BP-955 and optional BP-975 Battery Packs are not compatible with previous Canon camcorder models. Attaching the Battery Pack 1 Hold down the button on the d switch and move it to OFF (ቢ). 2 Slide the BATT. OPEN (open battery compartment) switch in the direction of the arrow and open the battery compartment cover (ባ). 3 Insert the battery pack all the way into the compartment and press gently until it clicks (ቤ). 4 Close the battery compartment cover. Removing the Battery Pack 1 Hold down the button on the d switch and move it to OFF. 2 Slide the BATT. OPEN switch in the direction of the arrow and open the battery compartment cover. 3 Press the BATT. RELEASE (battery release) latch in the direction of the arrow and pull out the battery. 4 Close the battery compartment cover. CHECKbutton 0 100% Battery charge indicator 24 Checking the Remaining Battery Charge If you are using the supplied BP-955 or optional BP-975 Battery Pack, you can check the approximate remaining battery charge using one of the following methods when the camcorder is turned off. When the camcorder is turned on, you can check on the remaining battery charge by looking at any recording/playback screen or the [Battery / Hour Meter] status screen (0 176). Press the CHECK button on the battery pack. An indicator will light for approximately 3 seconds and show the approximate remaining battery charge.